* Damp mop only, do not use wet mop, or use hardwood cleaner as recommended by your dealer.
* Do not put down area rugs or throw rugs for approximately one month in areas of constant exposure to sunlight after installation to prevent discoloration due to UV exposure.
* For stubborn spots use ammonia and water, a urethane floor cleaner, a citrus-based floor cleaner, or cleaner recommended by your dealer.
* Wipe up food and other spills immediately, before they get sticky or dry. Then wipe the floor dry with a dampened cloth. Do not use scrub pads as some may damage the floor.
* Every floor, including bamboo, must be swept with a soft bristle broom (or vacuumed) as often as necessary (do not use vacuum with beater bar on wood floors), and/or mopped as necessary. Walking on gritty, dirty floors is the fastest way to wear and scratch the finish.
* Exterior entrance mats should be used to capture most of the harmful dirt. Throw rugs or small sections of carpet just inside the entrances are also helpful.
* Keep shoe heels in good repair; any unprotected shoe bottoms or stiletto high heels could damage or dent the floor.
* Certain types of casters on furniture may damage any flooring. It is recommended that you remove any existing metal or plastic domes (small-bearing surface) from the bottom of furniture legs and replace them with barrel-type caster wheels or wide flat glides.
* Make sure protector pads are placed underneath all furniture and chair legs. Do not slide furniture or chairs across floor without protection.